Notícias

What Is a Groove End Butterfly Valve? Complete Guide | Laux Valve

2026-09-21

Groove end butterfly valves explained: AWWA C606 grooved connection, 300 psi ratings, no-flange installation, fire protection & HVAC applications.

MORE DETAILS

What Is Stop Shoulder Locating for a Vulcanized Seat on a Butterfly Valve?

2026-09-17

A vulcanized seat butterfly valve has its resilient rubber seat cured and bonded directly to the valve body. For the seat to seal correctly over thousands of cycles, it must stay in exactly the right position during molding, assembly, and operation. The stop shoulder, also called a locating shoulder or seat stop, is the machined shoulder inside the body that positions the vulcanized seat, controls how much the seat compresses, and protects it from being over-loaded by the disc.

MORE DETAILS

Metal Seated vs Resilient Seated Butterfly Valve: Which One to Choose

2026-09-07

The seat is the most application-sensitive component in a butterfly valve. It determines how the valve seals, its temperature limit, chemical compatibility, leakage class, operating torque, maintenance interval, and ultimately its total installed cost.

MORE DETAILS

How to Reduce Butterfly Valve Operating Torque

2026-09-02

Operating torque is one of the most important numbers in a butterfly valve specification. It determines actuator size, gear operator ratio, stem diameter, bearing load, and how much effort is required to open or close the valve. A valve that needs too much torque is harder to automate, wears out faster, and can become stuck at the worst possible time.

MORE DETAILS

Why Is My Butterfly Valve Leaking? 8 Common Causes and Solutions

2026-08-31

A leaking butterfly valve can be a small nuisance or a serious process safety issue. The first step is to identify where the leak is coming from: the seat, the stem or shaft area, the flange faces, or a damaged body or disc. Most butterfly valve leaks fall into a small number of predictable causes, and many of them can be corrected by proper selection, installation, or maintenance.

MORE DETAILS

Concentric AWWA C504 vs Double Eccentric Butterfly Valve: A Practical Comparison for Waterworks

2026-08-27

For large-diameter water pipelines, treatment plants, and pumping stations, both concentric and double eccentric butterfly valves appear regularly in project specifications. Both can be used in waterworks service, but they solve different engineering problems. A concentric AWWA C504 butterfly valve is a resilient-seated, centered-shaft design built around simplicity and economy.

MORE DETAILS

API609 Butterfly Valve Standard Explained

2026-08-26

Explaining the API 609 butterfly valve standard — Category A vs Category B, wafer, lug and double flange body types, pressure classes to Class 600, testing requirements and a step-by-step specification guide for industrial butterfly valves.

MORE DETAILS